dmesg - AMD Opteron 6274
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.11.2.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Tue Mar 25 19:59:55 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfe90000 (usable)
BIOS-e820: 00000000dfe9e000 - 00000000dfea0000 type 9
BIOS-e820: 00000000dfea0000 - 00000000dfeb2000 (ACPI data)
BIOS-e820: 00000000dfeb2000 - 00000000dfee0000 (ACPI NVS)
BIOS-e820: 00000000dfee0000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000101f000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xFB4A0
DMI: Supermicro H8DGT /H8DGT , BIOS 2.0a 11/09/2011
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x101f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000101f000000 aka 66032M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfe90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dfe90000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dfe90000 page 4k
kernel direct mapping tables up to dfe90000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000101f000000
0100000000 - 1000000000 page 1G
1000000000 - 101f000000 page 2M
kernel direct mapping tables up to 101f000000 @ 12000-14000
RAMDISK: 3724b000 - 37fef786
ACPI: RSDP 00000000000fa150 00024 (v02 ACPIAM)
ACPI: XSDT 00000000dfea0100 0007C (v01 SMCI 20111109 MSFT 00000097)
ACPI: FACP 00000000dfea0290 000F4 (v03 110911 FACP1525 20111109 MSFT 00000097)
ACPI: DSDT 00000000dfea06b0 0585E (v01 1AA11 1AA11000 00000000 INTL 20051117)
ACPI: FACS 00000000dfeb2000 00040
ACPI: APIC 00000000dfea0390 00158 (v01 110911 APIC1525 20111109 MSFT 00000097)
ACPI: MCFG 00000000dfea04f0 0003C (v01 110911 OEMMCFG 20111109 MSFT 00000097)
ACPI: OEMB 00000000dfeb2040 00075 (v01 110911 OEMB1525 20111109 MSFT 00000097)
ACPI: HPET 00000000dfeaa6b0 00038 (v01 110911 OEMHPET 20111109 MSFT 00000097)
ACPI: SRAT 00000000dfeaa6f0 00320 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: SLIT 00000000dfeaaa10 0003C (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: EINJ 00000000dfeaaa50 00130 (v01 AMIER AMI_EINJ 20111109 MSFT 00000097)
ACPI: BERT 00000000dfeaabe0 00030 (v01 AMIER AMI_BERT 20111109 MSFT 00000097)
ACPI: ERST 00000000dfeaac10 001B0 (v01 AMIER AMI_ERST 20111109 MSFT 00000097)
ACPI: HEST 00000000dfeaadc0 000A8 (v01 AMIER ABC_HEST 20111109 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 32 -> Node 0
SRAT: PXM 0 -> APIC 33 -> Node 0
SRAT: PXM 0 -> APIC 34 -> Node 0
SRAT: PXM 0 -> APIC 35 -> Node 0
SRAT: PXM 0 -> APIC 36 -> Node 0
SRAT: PXM 0 -> APIC 37 -> Node 0
SRAT: PXM 0 -> APIC 38 -> Node 0
SRAT: PXM 0 -> APIC 39 -> Node 0
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: PXM 2 -> APIC 64 -> Node 2
SRAT: PXM 2 -> APIC 65 -> Node 2
SRAT: PXM 2 -> APIC 66 -> Node 2
SRAT: PXM 2 -> APIC 67 -> Node 2
SRAT: PXM 2 -> APIC 68 -> Node 2
SRAT: PXM 2 -> APIC 69 -> Node 2
SRAT: PXM 2 -> APIC 70 -> Node 2
SRAT: PXM 2 -> APIC 71 -> Node 2
SRAT: PXM 3 -> APIC 72 -> Node 3
SRAT: PXM 3 -> APIC 73 -> Node 3
SRAT: PXM 3 -> APIC 74 -> Node 3
SRAT: PXM 3 -> APIC 75 -> Node 3
SRAT: PXM 3 -> APIC 76 -> Node 3
SRAT: PXM 3 -> APIC 77 -> Node 3
SRAT: PXM 3 -> APIC 78 -> Node 3
SRAT: PXM 3 -> APIC 79 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-420000000
SRAT: Node 1 PXM 1 420000000-820000000
SRAT: Node 2 PXM 2 820000000-c20000000
SRAT: Node 3 PXM 3 c20000000-101f000000
NUMA: Allocated memnodemap from 13040 - 33440
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000420000000
NODE_DATA [0000000000033440 - 000000000006743f]
bootmap [0000000000100000 - 0000000000183fff] pages 84
(10 early reservations) ==> bootmem [0000000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [003724b000 - 0037fef786] RAMDISK ==> [003724b000 - 0037fef786]
#4 [0000093800 - 0000100000] BIOS reserved ==> [0000093800 - 0000100000]
#5 [0002021000 - 000202127f] BRK ==> [0002021000 - 000202127f]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#8 [0000013000 - 000001303c] ACPI SLIT ==> [0000013000 - 000001303c]
#9 [0000013040 - 0000033440] MEMNODEMAP ==> [0000013040 - 0000033440]
Bootmem setup node 1 0000000420000000-0000000820000000
NODE_DATA [0000000420000040 - 000000042003403f]
bootmap [0000000420035000 - 00000004200b4fff] pages 80
(10 early reservations) ==> bootmem [0420000000 - 0820000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [003724b000 - 0037fef786] RAMDISK
#4 [0000093800 - 0000100000] BIOS reserved
#5 [0002021000 - 000202127f] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000013000] PGTABLE
#8 [0000013000 - 000001303c] ACPI SLIT
#9 [0000013040 - 0000033440] MEMNODEMAP
Bootmem setup node 2 0000000820000000-0000000c20000000
NODE_DATA [0000000820000080 - 000000082003407f]
bootmap [0000000820035000 - 00000008200b4fff] pages 80
(10 early reservations) ==> bootmem [0820000000 - 0c20000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [003724b000 - 0037fef786] RAMDISK
#4 [0000093800 - 0000100000] BIOS reserved
#5 [0002021000 - 000202127f] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000013000] PGTABLE
#8 [0000013000 - 000001303c] ACPI SLIT
#9 [0000013040 - 0000033440] MEMNODEMAP
Bootmem setup node 3 0000000c20000000-000000101f000000
NODE_DATA [0000000c200000c0 - 0000000c200340bf]
bootmap [0000000c20035000 - 0000000c200b4dff] pages 80
(10 early reservations) ==> bootmem [0c20000000 - 101f000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [003724b000 - 0037fef786] RAMDISK
#4 [0000093800 - 0000100000] BIOS reserved
#5 [0002021000 - 000202127f] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000013000] PGTABLE
#8 [0000013000 - 000001303c] ACPI SLIT
#9 [0000013040 - 0000033440] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea000e700000-ffffea000e7fffff] potential offnode page_structs
[ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
[ffffea001c700000-ffffea001c7fffff] potential offnode page_structs
[ffffea000e800000-ffffea001c7fffff] PMD -> [ffff880420200000-ffff88042e1fffff] on node 1
[ffffea002a700000-ffffea002a7fffff] potential offnode page_structs
[ffffea001c800000-ffffea002a7fffff] PMD -> [ffff880820200000-ffff88082e1fffff] on node 2
[ffffea002a800000-ffffea00387fffff] PMD -> [ffff880c20200000-ffff880c2e1fffff] on node 3
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0101f000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000dfe90
0: 0x00100000 -> 0x00420000
1: 0x00420000 -> 0x00820000
2: 0x00820000 -> 0x00c20000
3: 0x00c20000 -> 0x0101f000
On node 0 totalpages: 4193811
DMA zone: 56 pages used for memmap
DMA zone: 146 pages reserved
DMA zone: 3769 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898760 pages, LIFO batch:31
Normal zone: 44800 pages used for memmap
Normal zone: 3232000 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
On node 2 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
On node 3 totalpages: 4190208
Normal zone: 57288 pages used for memmap
Normal zone: 4132920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x40] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x41] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x42] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x43] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x44] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x45] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x46] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x47] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x48] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x49] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x4a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x4b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x4c] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x4d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x4e] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x4f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000093000 - 0000000000094000
PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000dfe90000 - 00000000dfe9e000
PM: Registered nosave memory: 00000000dfe9e000 - 00000000dfea0000
PM: Registered nosave memory: 00000000dfea0000 - 00000000dfeb2000
PM: Registered nosave memory: 00000000dfeb2000 - 00000000dfee0000
PM: Registered nosave memory: 00000000dfee0000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at f0000000 (gap: f0000000:fe00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:4
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [1] 08 09 10 11 12 13 14 15
pcpu-alloc: [2] 16 17 18 19 20 21 22 23 [3] 24 25 26 27 28 29 30 31
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 16541369
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 66069256k/67616768k available (5326k kernel code, 526260k absent, 1021252k reserved, 7012k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:664
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2200.142 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.28 BogoMIPS (lpj=2200142)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00dff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21777 entries in 86 pages
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(TM) Processor 6274 stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Booting Node 2, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Booting Node 3, Processors #24 #25 #26 #27 #28 #29 #30 #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (140794.65 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at dfeb2000 (188416 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xd000-0xd007]
pci 0000:00:11.0: reg 14: [io 0xc000-0xc003]
pci 0000:00:11.0: reg 18: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 20: [io 0x9000-0x900f]
pci 0000:00:11.0: reg 24: [mem 0xfe9fa400-0xfe9fa7ff]
pci 0000:00:12.0: reg 10: [mem 0xfe9f6000-0xfe9f6fff]
pci 0000:00:12.1: reg 10: [mem 0xfe9f7000-0xfe9f7fff]
pci 0000:00:12.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe9f8000-0xfe9f8fff]
pci 0000:00:13.1: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
pci 0000:00:13.2: reg 10: [mem 0xfe9fac00-0xfe9facff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.5: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
pci 0000:03:00.0: reg 10: [mem 0xfeb60000-0xfeb7ffff]
pci 0000:03:00.0: reg 14: [mem 0xfeb40000-0xfeb5ffff]
pci 0000:03:00.0: reg 18: [io 0xe400-0xe41f]
pci 0000:03:00.0: reg 1c: [mem 0xfeb1c000-0xfeb1ffff]
pci 0000:03:00.0: reg 30: [mem 0xfeb20000-0xfeb3ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 10: [mem 0xfebe0000-0xfebfffff]
pci 0000:03:00.1: reg 14: [mem 0xfebc0000-0xfebdffff]
pci 0000:03:00.1: reg 18: [io 0xe800-0xe81f]
pci 0000:03:00.1: reg 1c: [mem 0xfeb9c000-0xfeb9ffff]
pci 0000:03:00.1: reg 30: [mem 0xfeba0000-0xfebbffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
pci 0000:02:00.0: reg 18: [mem 0xfc800000-0xfcffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfcffffff 64bit pref]
pci 0000:01:04.0: reg 10: [mem 0xfb000000-0xfbffffff pref]
pci 0000:01:04.0: reg 14: [mem 0xfdffc000-0xfdffffff]
pci 0000:01:04.0: reg 18: [mem 0xfe000000-0xfe7fffff]
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
pci 0000:00:14.4: bridge window [mem 0xfb000000-0xfbffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0a10-0x0a1f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0062-0x0063]
pnp 00:0a: [io 0x0065-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00b1]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x0ca2-0x0ca3]
pnp 00:0a: [io 0x0550-0x0551]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: [io 0x040b]
pnp 00:0a: [io 0x04d6]
pnp 00:0a: [io 0x0c00-0x0c01]
pnp 00:0a: [io 0x0c14]
pnp 00:0a: [io 0x0c50-0x0c51]
pnp 00:0a: [io 0x0c52]
pnp 00:0a: [io 0x0c6c]
pnp 00:0a: [io 0x0c6f]
pnp 00:0a: [io 0x0cd0-0x0cd1]
pnp 00:0a: [io 0x0cd2-0x0cd3]
pnp 00:0a: [io 0x0cd4-0x0cd5]
pnp 00:0a: [io 0x0cd6-0x0cd7]
pnp 00:0a: [io 0x0cd8-0x0cdf]
pnp 00:0a: [io 0x0800-0x089f]
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0b00-0x0b0f]
pnp 00:0a: [io 0x0b20-0x0b3f]
pnp 00:0a: [io 0x0900-0x090f]
pnp 00:0a: [io 0x0910-0x091f]
pnp 00:0a: [io 0xfe00-0xfefe]
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [mem 0xffb80000-0xffbfffff]
pnp 00:0a: [mem 0xfec10000-0xfec1001f]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x02f8-0x02ff]
pnp 00:0c: [irq 3]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xdfffffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [io 0x0ca2-0x0ca3] has been reserved
system 00:0a: [io 0x0550-0x0551] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] has been reserved
system 00:0a: [io 0x0b00-0x0b0f] has been reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: BAR 7: can't assign mem (size 0x20000)
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: BAR 10: can't assign mem (size 0x20000)
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: BAR 7: can't assign mem (size 0x20000)
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: BAR 10: can't assign mem (size 0x20000)
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfcffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
pci 0000:00:14.4: bridge window [mem 0xfb000000-0xfbffffff pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xfc800000-0xfcffffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xfb000000-0xfbffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:01:04.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13969k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1490083797.459:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 3BC36F007EF7D4EA
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Invalid return from get global enables command, cannot enable the event buffer.
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980, prod_id: 0xaa11, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: Failed to enable APEI firmware first mode.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9fa800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fac00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9f6000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9f7000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9f8000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9f9000
Refined TSC clocksource calibration: 2199.999 MHz.
Switching to clocksource tsc
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fb000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2017-03-21 08:09:59 UTC (1490083799)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.0: version 3.0
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa700 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa780 irq 22
usb 5-3: new full speed USB device number 2 using ohci_hcd
usb 5-3: New USB device found, idVendor=0557, idProduct=2221
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: Hermon USB hidmouse Device
usb 5-3: Manufacturer: Winbond Electronics Corp
usb 5-3: configuration #1 chosen from 1 choice
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input4
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input1
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST500DM005 HD502HJ, 1AJ10001, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST500DM005 HD502 1AJ1 PQ: 0 ANSI: 5
ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sdb:
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1490083801.434:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Mar 25 2014
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 3).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:03:00.0: power state changed by ACPI to D0
igb 0000:03:00.0: power state changed by ACPI to D0
igb 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 29 for MSI/MSI-X
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 30 for MSI/MSI-X
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 31 for MSI/MSI-X
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.0: irq 32 for MSI/MSI-X
igb 0000:03:00.0: irq 24 for MSI/MSI-X
igb 0000:03:00.0: irq 25 for MSI/MSI-X
igb 0000:03:00.0: irq 26 for MSI/MSI-X
igb 0000:03:00.0: irq 27 for MSI/MSI-X
igb 0000:03:00.0: irq 28 for MSI/MSI-X
igb 0000:03:00.0: irq 29 for MSI/MSI-X
igb 0000:03:00.0: irq 30 for MSI/MSI-X
igb 0000:03:00.0: irq 31 for MSI/MSI-X
igb 0000:03:00.0: irq 32 for MSI/MSI-X
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:55:22:16
igb 0000:03:00.0: eth0: PBA No: Unknown
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:03:00.1: power state changed by ACPI to D0
igb 0000:03:00.1: power state changed by ACPI to D0
igb 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:03:00.1: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
igb 0000:03:00.1: irq 41 for MSI/MSI-X
igb 0000:03:00.1: irq 33 for MSI/MSI-X
igb 0000:03:00.1: irq 34 for MSI/MSI-X
igb 0000:03:00.1: irq 35 for MSI/MSI-X
igb 0000:03:00.1: irq 36 for MSI/MSI-X
igb 0000:03:00.1: irq 37 for MSI/MSI-X
igb 0000:03:00.1: irq 38 for MSI/MSI-X
igb 0000:03:00.1: irq 39 for MSI/MSI-X
igb 0000:03:00.1: irq 40 for MSI/MSI-X
igb 0000:03:00.1: irq 41 for MSI/MSI-X
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:55:22:17
igb 0000:03:00.1: eth1: PBA No: Unknown
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
mlx4_core: Mellanox ConnectX core driver v1.1 (Dec, 2011)
mlx4_core: Initializing 0000:02:00.0
mlx4_core 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
mlx4_core 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 46 for MSI/MSI-X
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
mlx4_core 0000:02:00.0: irq 54 for MSI/MSI-X
mlx4_core 0000:02:00.0: command 0xc failed: fw status = 0x40
mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.0 (Dec 2011)
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v1.0 (April 4, 2008)
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam15h.bin
microcode: CPU0: patch_level=0x6000624
microcode: CPU0: updated (new patch_level=0x6000629)
microcode: CPU1: patch_level=0x6000629
microcode: CPU2: patch_level=0x6000624
microcode: CPU2: updated (new patch_level=0x6000629)
microcode: CPU3: patch_level=0x6000629
microcode: CPU4: patch_level=0x6000624
microcode: CPU4: updated (new patch_level=0x6000629)
microcode: CPU5: patch_level=0x6000629
microcode: CPU6: patch_level=0x6000624
microcode: CPU6: updated (new patch_level=0x6000629)
microcode: CPU7: patch_level=0x6000629
microcode: CPU8: patch_level=0x6000624
microcode: CPU8: updated (new patch_level=0x6000629)
microcode: CPU9: patch_level=0x6000629
microcode: CPU10: patch_level=0x6000624
microcode: CPU10: updated (new patch_level=0x6000629)
microcode: CPU11: patch_level=0x6000629
microcode: CPU12: patch_level=0x6000624
microcode: CPU12: updated (new patch_level=0x6000629)
microcode: CPU13: patch_level=0x6000629
microcode: CPU14: patch_level=0x6000624
microcode: CPU14: updated (new patch_level=0x6000629)
microcode: CPU15: patch_level=0x6000629
microcode: CPU16: patch_level=0x6000624
microcode: CPU16: updated (new patch_level=0x6000629)
microcode: CPU17: patch_level=0x6000629
microcode: CPU18: patch_level=0x6000624
microcode: CPU18: updated (new patch_level=0x6000629)
microcode: CPU19: patch_level=0x6000629
microcode: CPU20: patch_level=0x6000624
microcode: CPU20: updated (new patch_level=0x6000629)
microcode: CPU21: patch_level=0x6000629
microcode: CPU22: patch_level=0x6000624
microcode: CPU22: updated (new patch_level=0x6000629)
microcode: CPU23: patch_level=0x6000629
microcode: CPU24: patch_level=0x6000624
microcode: CPU24: updated (new patch_level=0x6000629)
microcode: CPU25: patch_level=0x6000629
microcode: CPU26: patch_level=0x6000624
microcode: CPU26: updated (new patch_level=0x6000629)
microcode: CPU27: patch_level=0x6000629
microcode: CPU28: patch_level=0x6000624
microcode: CPU28: updated (new patch_level=0x6000629)
microcode: CPU29: patch_level=0x6000629
microcode: CPU30: patch_level=0x6000624
microcode: CPU30: updated (new patch_level=0x6000629)
microcode: CPU31: patch_level=0x6000629
Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (sda3): Mounting Filesystem
XFS (sda3): Ending clean mount
Adding 134143992k swap on /dev/sda1. Priority:-1 extents:1 across:134143992k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip_tables: (C) 2000-2006 Netfilter Core Team
openvswitch: Open vSwitch switching datapath
device ovs-system entered promiscuous mode
device br-int entered promiscuous mode
device br-tun entered promiscuous mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
ADDRCONF(NETDEV_UP): ib0: link is not ready
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
powernow-k8: Found 4 AMD Opteron(TM) Processor 6274 (32 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
ipmi device interface
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
br-tun: no IPv6 routers present
br-int: no IPv6 routers present
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
eth0: no IPv6 routers present
ib0: no IPv6 routers present
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching